The LED 60R 2x24 I is a state of the art eccentric looking luminaire designed for any outdoor need - street and area lightening. For a LED light fixture, it is important to have good thermal management. And that is the main design direction in this luminaire - to dissipate the heat from the LEDs in order to insure them the perfect working conditions. The problem with the usual heatsinks is the contamination of the cooling surface, which makes it uneffective. In this design the special form of the aluminium body makes it impossible to contaminate during normal exploitation. The heat is dissipated from electronics with the heat transfer capability of the aluminum body. Durable lighting capability is achieved with the help of high class LEDs and the low level strain that is put on them. The led modules and the connection device of the light fixture are changeable, and they are encapsulated against dust and moisture. LED 60R 2x24 I is compatible with solar systems.
This is a low cost, high class, energy-efficient luminaire requiring minimal maintenance. The low wattage but high luminous flux make LED 60R 2x24 I the perfect choice for any budget. The light fixture is suited for new installations, as well as for replacement of old light fixtures. LED 60R 2x24 I can be installed to horizontal shaft - standart for street lightning. It comes in a variety of body colors. The temperature color and angle of beam can also be customised.
Benefits:
Technical Specification:
| General Characteristics | |
| LED chip manufacturer | XPG CREE |
| Housing | Aluminium / powder coated steel |
| Life of the LEDs to 70% lumen maintenance | 70 000 - 100 000hr |
| Operating temperature | -25 - +50 °C |
| Ingress protection | IP 65 |
| Electrical Characteristics | |
| Wattage | 80 W |
| Type of power supply | 110/230 Vac with PFC and eff. 90% or 9/12V DC |
| Light characteristics | |
| Color rendering index | CRI ≥ 70 |
| Luminous flux | 6600 lm |
| Product Dimensions | |
| Width/length/height | 600x180x100 mm |
| Weight | 9 kg |
